How to paste non-woven wallpaper

Wenzhou Xinyu non-woven fabric is currently the most popular new type of green environmental protection material in the world. It is harmless to human body and the environment, and fully meets the environmental protection and safety standards. With pure non-woven paper as the base material, the surface is printed with water-based ink and then coated with special materials, which are specially processed. It has the advantages of sound absorption, ventilation, moisture dissipation, and no deformation. At the same time, it has the beauty of nature, simplicity and roughness, and has a strong pastoral atmosphere, giving people the feeling of being in the natural wilderness. However, non-woven wallpaper is relatively low in water resistance because it is made of natural materials. Therefore, special attention should be paid to the construction. The following introduces the precautions for the construction of non-woven wallpaper.

1. Treatment and requirements for walls

The wall surface must be flat without unevenness, dirt or peeling and other bad conditions: the color of the wall surface is uniform, smooth, clean and dry, and the yin and yang angles are vertical; Do not add water to the membrane); the quality of the wall should be checked before the construction of the wallpaper to ensure that the wall meets the requirements and is dry.

2. Construction procedures

①Check the cut paper:

To check the product identification and read the construction instructions, it must be cut and used in the order of product batch number, box number and volume number. Measure the length of the cutting paper according to the height of the working wall. The pattern above the wallpaper should be a complete pattern and the position should be appropriate. When cutting, compare the pattern with the previous product, the position is correct, the length is appropriate, and the direction mark is made at one end. When placing it after cutting, the curvature should be enlarged as much as possible, and be careful not to cause crease marks and affect the decorative effect.

②Sizing:

Because of its good air permeability and strong hygroscopicity, non-woven wallpaper is different from other wallpapers. It should be thicker and thicker than other wallpapers, which will reduce its fluidity. Glue. Never brush the glue directly on the back of the non-woven fabric, let alone soak it in water.

③Post:

Start the papering from the inner corner of the room, and use an infrared level to compare and measure (to prevent the wallpaper from tilting due to the non-straight inner corner). Using a brown bristle brush, flatten the wallpaper and scrape out any air bubbles. Do not use hard tools such as scrapers to prevent surface fibers from fluffing. Front and back '↑↓' products need to be paved in one positive and one reverse direction, and each wallpaper should be tailor-made on the same side.

④Seam treatment:

The joints can be compacted with a soft rubber roller. It is forbidden to overflow the glue at the joints to avoid affecting the effect of the product.

⑤Wide product construction:

The construction of wide-width non-woven paper needs to be lapped on the wall, and the edge of the blade should be kept sharp when cutting or lapping, so as not to affect the seam effect. In order to keep the seam vertical, use a tailor's shovel or a steel ruler to prevent the problem of the seam not running straight. After trimming, take out the trimmed parts on both sides, and press the seam with a soft rubber roller to prevent the glue from overflowing at the seam.

3. After construction

After the construction is completed, close the doors and windows for 48 hours, strictly prohibit ventilation, and let the wallpaper dry naturally in the shade. In order to prevent uneven drying and shrinkage caused by the seam. If there is dust on the surface, use a short-bristle brush or duster to flick it, and do not wipe with a wet towel to cause pollution to expand.

Non-woven wallpaper is made of natural plant fibers such as cotton and linen through non-woven molding, which is a thorough environmental protection material. The advantages of non-woven wallpaper can be better displayed by paying attention to the above matters during the construction of non-woven wallpaper.

Service-based companies as Wenzhou Xinyu Non-woven Fabric Co., LTD. are increasingly becoming more popular internationally.

Looking for a company to handle your CUSTOMIZING flame retardant non woven fabric? Visit XINYU Non-woven today for more information.

CUSTOMIZING has obtained many affirmation in the market. Undoubtedlly, our customers are totally satisfied with our products.

When selecting the best products for customers, we considered not only the CUSTOMIZING, but also the non-woven manufacturing.

Wenzhou Xinyu Non-woven Fabric Co., LTD. are providing this to you at very low cost. Our claims are only based on different feed-backs received from various clients and not based on self-judgment.