- Non-woven Draw Fabric
- Flame Retardant Non Woven
- Non Woven Hair Curly Paper
- Cable Wrapping Non Woven
- Medical Non Woven Fabric
- Non Woven Filter Fabric
- Interlining Fabric
- Cable Wrapping Tapes
- Other Fabrics
- Hot Air Through Nonwoven
How to paste non-woven wallpaper
1. Processing and request for the wall surface
The wall must be flat and free of bad conditions such as no height, no dirt or falling off: the wall color is uniform, smooth and dry to clean, and the yin and yang angles are straight; Do not add water to the base film); quality inspection should be carried out on the wall before wallpaper construction to ensure that the wall meets the requirements and is dry.
2. Construction procedures
①Check the cut paper: Check the product identification and read the construction instructions, it must be cut and used according to the order of the product batch number, box number, and volume number. Measure the length of the cut paper according to the height of the working wall. The pattern above the wallpaper should be a complete picture and the orientation should be appropriate. When cutting, compare the pattern with the product on the previous sheet, the orientation is accurate, the length is appropriate, and the direction mark is made at one end. When placing after cutting, the camber should be expanded as much as possible, and be careful not to form crease marks and affect the decoration effect.
②Sizing: Non-woven wallpaper has good air permeability and strong hygroscopicity. Different from other wallpapers, the glue should be thicker and thicker than other wallpapers, so that its fluidity will decrease, and the content of wallpaper glue should be reduced. The amount of water, evenly glue on the wall. Never apply glue directly on the reverse side of the non-woven fabric, let alone soak it in water
③Paste: Paste from the inside corner of the room, compare and measure with an infrared level (to prevent the wallpaper from being skewed because the inside corner is not straight). Using a brown bristle brush, flatten the wallpaper and scrape out any air bubbles. Do not use hard objects such as scrapers to avoid fluffing of surface fibers. Products with '↑↓' on the front and back must be paved in one direction and the other in the opposite direction, and each wallpaper should be a garment with a side edge.
④Seam treatment: The seam can be compacted with a soft rubber roller to prevent the glue from overflowing at the seam and avoid affecting the function of the product.
⑤Construction of wide-width products: The construction of wide-width non-woven paper needs to be installed on the wall to make garments. When cutting or edging into garments, the tip of the blade should be kept sharp to avoid affecting the seam effect. In order to keep the seam straight, use a garment spatula or steel ruler to avoid the problem of the seam not running straight. After cutting the edges, take out the two sides and cut some, and press the seam with a soft rubber roller to prevent the glue from overflowing at the seam.
3. After construction
After the construction is completed, lock the doors and windows for 48 hours, prohibit ventilation, and let the wallpaper dry naturally. In order to avoid dry shortening and uneven formation of seams. If there is dust on the surface, use a short-bristle brush or duster to flick it, and do not wipe with a wet towel to form pollution expansion.
The above is the sticking method that the non-woven fabric manufacturer told you, please keep in mind. At the same time, I hope that everyone can have a better understanding of this aspect.
The address of this article: http://www.meitaiwufangbu.com/industry/199.html
If you are a non-woven product fan, you definitely want to enjoy the best possible. The that you choose plays a major role with the kind of experience you have when using it.
Wenzhou Xinyu Non-woven Fabric Co., LTD. are dedicated to providing excellent underwriting and loss control advice up front, and to ensuring superior customer service through the life of the policy.
We sells CUSTOMIZING and focus on operational procedure and manufacturing facilities non-woven company.