Professional Custom Non Woven Fabric Manufacturer And Supplier Since 2001

  

Correct laying method of non-woven wallpaper

by:XINYU Non-woven     2022-05-31


Now there are many styles of home decoration available, but there will still be many similar decoration models. So some people are not satisfied with this and want to be unique. Then the better solution is to make non-woven wallpaper the highlight of your home. Whether the effect of wallpaper decoration is good or not, in addition to choosing beautiful patterns, we must also pay special attention to its paving effect.





wallpaper cropping



Arrange the wallpaper according to the serial number of the wallpaper, measure the height of the wall, reserve 5 cm above and below the height of the wall to cut the wallpaper, remember to cut one roll of wallpaper at a time to prevent quality problems.



Wall treatment



The wall surface should be flat, clean, dry, and uniform in color. There should be no gaps, uneven unevenness, and the wall should be treated with base film (or varnish) before construction.



Brush wallpaper glue



The glue for sticking non-woven wallpaper must be evenly brushed on the wall with a thickness of 2 mm. Never brush the glue directly on the back of the non-woven fabric, let alone soak it in water. Non-woven fabrics are different from other wallpapers, and the glue should be thicker and thicker than other wallpapers, making it less fluid.



Construction wallpaper cutting



It is necessary to lap the edges and cut the construction. The specific method is to lap the edges during construction. The number of laps depends on the pattern, about 3 cm. The plain non-woven fabrics are constructed by the method of positive and negative sticking during construction. After ensuring that the pattern is aligned, press down with a ruler at the overlapping place to cut, try to avoid cutting at the outside corner, so as not to cause the wallpaper at the outside corner (referring to the protruding corner on the wall) to warp. When cutting, make sure that the cutting knife is sharp and there should be no burrs. At the same time, pay attention to the strength of the knife. It is necessary to ensure that one cut and one knife are cut in two, but the surface of the wall cannot be excessively damaged.



Cleaning after wallpaper paste



If there is dust on the surface after construction, use a short-bristle brush or duster to flick it, and do not wipe it with a wet towel to cause pollution to expand.



Wenzhou Xinyu Non-woven Fabric Co., LTD. is a professional manufacturer of environmentally friendly non-woven fabrics, with a complete and scientific quality management system. Mainly produces non-woven fabrics, spunbond non-woven fabrics, pp non-woven fabrics, non-woven bags and various non-woven products.


Wenzhou Xinyu Non-woven Fabric Co., LTD. is devoted to satisfy our customers with a wide array of the finest using experience.
Excellent quality yet affordable best at XINYU Non-woven. Don't miss out!
We began investing in our workforce and negotiated deals with major suppliers and providers to lower the cost of equipment so the technicians could enhance the competitiveness of CUSTOMIZING right away.
Wenzhou Xinyu Non-woven Fabric Co., LTD. emphasizes our commitment to quality in our laboratory and R&D services.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...