Problems that should be paid attention to in the non-woven printing process

First, the problem of plate making.

There is no doubt that plate making is a prerequisite for printing and also the core technology. So what are the problems of plate making in non-woven printing?

1. The depth and thickness of the plate-making, which affects the quality and cost;

2. The length of the plate-making and the effective printing area, which should be designed with their own printing equipment , the saving can be saved, the saving must not be saved, otherwise it may affect the machine, and in severe cases, the copper plate will be directly useless.

3. When designing the pattern, you must pay attention to the tiny places, whether it needs to be enlarged or reduced, whether there should be a gap, and so on.

4. Pay full attention to the printing and winding directions when making plates.

5. The color scale, that is, the problem of the color mark, whether the computer can track it or not, the sensitivity is related to the depth of the color scale.

Second, the printing process.

1. The most important thing is to press the stick, which should be considered soft and hard, medium and high.

2. The size of the pressure is the problem, and the pattern produced by the applied pressure is definitely different.

3. Tension problems, many fabric tensions will affect printing.

4. The most obvious effect of fabric shrinkage and elasticity is the printing accuracy.